This Longwave's N422 is an advanced two-carrier outdoor eNodeB (eNB) that is compliant with 3GPP LTE TDD technology. This 4 x 1 W eNB is capable of operating in Carrier Aggregation (CA) mode or Dual Carrier (DC) / split mode.In CA mode, contiguous or non-contiguous channels are aggregated to provide up to 40 MHz bandwidth. This essentially doubles the downlink capacity when the CA 422 is used with all CAT6/7 user equipment. In DC mode, each carrier is treated as an independent cell, supporting 64+64 users, and each supporting 5/10/15/ 20 MHz bandwidth. Using a N422 in DC mode simplifies and streamlines the deployment of split sectors.
This Longwave's N422 is an advanced two-carrier outdoor eNodeB (eNB) that is compliant with 3GPP LTE TDD technology. This 4 x 1 W eNB is capable of operating in Carrier Aggregation (CA) mode or Dual Carrier (DC) / split mode.In CA mode, contiguous or non-contiguous channels are aggregated to provide up to 40 MHz bandwidth. This essentially doubles the downlink capacity when the CA 422 is used with all CAT6/7 user equipment. In DC mode, each carrier is treated as an independent cell, supporting 64+64 users, and each supporting 5/10/15/ 20 MHz bandwidth. Using a N422 in DC mode simplifies and streamlines the deployment of split sectors.
● GUI-based local and remote Web management
● Excellent non-line-of-sight (NLOS) coverage
● Suitable for private and public deployments; any IP based backhaul can be used, including public tran-smission protected by Internet Protocol Security
● Aggregate peak rate: (up to) DL 220 Mbps, UL 28 Mbps with 2x20 MHz, using all Cat6/7 or higher Ues
● 64 concurrent users per carrier, 64+64 in DC mode; upgradeable to higher capacity in future releases
● GUI-based local and remote Web management
● Excellent non-line-of-sight (NLOS) coverage
● Suitable for private and public deployments; any IP based backhaul can be used, including public tran-smission protected by Internet Protocol Security
● Aggregate peak rate: (up to) DL 220 Mbps, UL 28 Mbps with 2x20 MHz, using all Cat6/7 or higher Ues
● 64 concurrent users per carrier, 64+64 in DC mode; upgradeable to higher capacity in future releases
● Supports 4-port antenna or 2 antennas with 2 ports
● Integrated small cell form factor for quick and easy installation
● Embedded HaloB ("lite" EPC) solution
● Supports Citizens Broadband Radio Service (CBRS)
● Plug-and-play with self-organizing network (SON) capabilities
● IoT with all standard LTE Evolved Packet Core (EPC)
● TR-069 network management interface support
● Lower power consumption to reduce OPEX
● Supports 4-port antenna or 2 antennas with 2 ports
● Integrated small cell form factor for quick and easy installation
● Embedded HaloB ("lite" EPC) solution
● Supports Citizens Broadband Radio Service (CBRS)
● Plug-and-play with self-organizing network (SON) capabilities
● IoT with all standard LTE Evolved Packet Core (EPC)
● TR-069 network management interface support
● Lower power consumption to reduce OPEX
Hardware Specification |
|
||
LTE Mode |
TDD |
||
Frequency Bands |
Band 48 and partial bands 42, 43 |
||
Channel Bandwidth |
5/ 10/ 15/ 20MHz |
||
Max. Output Power |
30 dBm / channel |
||
Power Supply |
48V DC, AC adaptor (multi-national standards) |
||
Power Consumption |
Typical 60W, MAX 100W |
||
Receive Sensitivity |
-100 dBm |
||
Synchronization |
GPS |
||
Interfaces |
1 optical (SFP) and 1 RJ-45 Ethernet interface (1 GE) |
||
MIMO |
DL: 2x2 on each carrier |
||
Installation |
Pole or wall mount |
||
Antenna Type |
eNB has N-Type connectors and supports external high-gain antenna(s), |
||
Dimensions (HxWxD) |
310 x 239 x 105 mm |
||
Weight |
5.5 kg |
||
MTBF |
≥ 150000 hours |
||
MTTR |
≤ 1 hour |
||
Software Specification |
|
||
LTE Standard |
3GPP Release 15 |
||
Peak Rate (up to) |
2*20MHz |
SA1 |
DL 2*80 Mbps, UL 2*28 Mbps |
SA2 |
DL 2*110 Mbps, UL 2*14 Mbps |
||
2*10MHz |
SA1 |
DL 2*40 Mbps, UL 2*14 Mbps |
|
SA2 |
DL 2*55 Mbps, UL 2*7 Mbps |
||
Peak Rate (up to) |
2*20MHz |
SA1 |
DL 160 Mbps, UL 28 Mbps |
SA2 |
DL 220 Mbps, UL 14 Mbps |
||
2*10MHz |
SA1 |
DL 80 Mbps, UL 14 Mbps |
|
SA2 |
DL 110 Mbps, UL 7 Mbps |
||
User Capacity |
64 concurrent users in single carrier mode 64+64 concurrent users in DC mode |
||
QoS Control |
3GPP standard Quality of Service Class Identifier (QCI) |
||
Modulation |
DL: QPSK, 16QAM, 64QAM, and future software release 256QAM UL: QPSK, 16QAM, 64QAM |
||
Voice |
VoLTE (future software release) |
||
Traffic Offload |
Local breakout |
||
SON |
Self-Organizing Network: |
||
• Automatic setup |
|||
• Automatic Neighbor Relation (ANR) |
|||
• PCI confliction detection |
|||
RAN Sharing |
Multi-Operator Core Network (MOCN) |
||
Network Mgmt |
TR069 |
||
Maintenance |
• Remote/local maintenance |
||
• Online status management |
|||
• Performance statistics |
|||
• Fault management |
|||
• Local or remote software upgrade |
|||
• Logging |
|||
• Connectivity diagnosis |
|||
• Automatic start and configuration |
|||
• Alarm reporting |
|||
• User information tracing |
|||
• Signaling Trace |
|||
Environmental Specification |
|
||
Operating Temperature |
-40°C to 55°C |
||
Humidity |
5% to 95% |
||
Atmospheric Pressure |
70 kPa to 106 kPa |
||
Ingress Protection Rating |
IP66 |
||
Power Interface Lightning Protection |
Differential mode: ±10 KA ;Common mode: ±20 KA |
● Technical spec subject to change without notice
Hardware Specification |
|
||
LTE Mode |
TDD |
||
Frequency Bands |
Band 48 and partial bands 42, 43 |
||
Channel Bandwidth |
5/ 10/ 15/ 20MHz |
||
Max. Output Power |
30 dBm / channel |
||
Power Supply |
48V DC, AC adaptor (multi-national standards) |
||
Power Consumption |
Typical 60W, MAX 100W |
||
Receive Sensitivity |
-100 dBm |
||
Synchronization |
GPS |
||
Interfaces |
1 optical (SFP) and 1 RJ-45 Ethernet interface (1 GE) |
||
MIMO |
DL: 2x2 on each carrier |
||
Installation |
Pole or wall mount |
||
Antenna Type |
eNB has N-Type connectors and supports external high-gain antenna(s), |
||
Dimensions (HxWxD) |
310 x 239 x 105 mm |
||
Weight |
5.5 kg |
||
MTBF |
≥ 150000 hours |
||
MTTR |
≤ 1 hour |
||
Software Specification |
|
||
LTE Standard |
3GPP Release 15 |
||
Peak Rate (up to) |
2*20MHz |
SA1 |
DL 2*80 Mbps, UL 2*28 Mbps |
SA2 |
DL 2*110 Mbps, UL 2*14 Mbps |
||
2*10MHz |
SA1 |
DL 2*40 Mbps, UL 2*14 Mbps |
|
SA2 |
DL 2*55 Mbps, UL 2*7 Mbps |
||
Peak Rate (up to) |
2*20MHz |
SA1 |
DL 160 Mbps, UL 28 Mbps |
SA2 |
DL 220 Mbps, UL 14 Mbps |
||
2*10MHz |
SA1 |
DL 80 Mbps, UL 14 Mbps |
|
SA2 |
DL 110 Mbps, UL 7 Mbps |
||
User Capacity |
64 concurrent users in single carrier mode 64+64 concurrent users in DC mode |
||
QoS Control |
3GPP standard Quality of Service Class Identifier (QCI) |
||
Modulation |
DL: QPSK, 16QAM, 64QAM, and future software release 256QAM UL: QPSK, 16QAM, 64QAM |
||
Voice |
VoLTE (future software release) |
||
Traffic Offload |
Local breakout |
||
SON |
Self-Organizing Network: |
||
• Automatic setup |
|||
• Automatic Neighbor Relation (ANR) |
|||
• PCI confliction detection |
|||
RAN Sharing |
Multi-Operator Core Network (MOCN) |
||
Network Mgmt |
TR069 |
||
Maintenance |
• Remote/local maintenance |
||
• Online status management |
|||
• Performance statistics |
|||
• Fault management |
|||
• Local or remote software upgrade |
|||
• Logging |
|||
• Connectivity diagnosis |
|||
• Automatic start and configuration |
|||
• Alarm reporting |
|||
• User information tracing |
|||
• Signaling Trace |
|||
Environmental Specification |
|
||
Operating Temperature |
-40°C to 55°C |
||
Humidity |
5% to 95% |
||
Atmospheric Pressure |
70 kPa to 106 kPa |
||
Ingress Protection Rating |
IP66 |
||
Power Interface Lightning Protection |
Differential mode: ±10 KA ;Common mode: ±20 KA |
● Technical spec subject to change without notice