This Longwave N227 eNode B is an outdoor Long-Term Evolution (LTE) product that operates in Frequency Division Duplexing (FDD) mode. This eNB provides users with high-speed broadband wireless access to the Internet using 2*20W output power (2x2 MIMO with 20W output each channel). This unit is compact, lightweight, and easy to deploy.
This Longwave N227 eNode B is an outdoor Long-Term Evolution (LTE) product that operates in Frequency Division Duplexing (FDD) mode. This eNB provides users with high-speed broadband wireless access to the Internet using 2*20W output power (2x2 MIMO with 20W output each channel). This unit is compact, lightweight, and easy to deploy.
● Complies with 3GPP Release 9 standards
● GUI-based local and remote Web management
● TR069 network management protocol support
● External high-gain antenna
● Higher transmission power for extended coverage
● Any IP based backhaul can be used, including public transmission protected by Internet Protocol Security
● Complies with 3GPP Release 9 standards
● GUI-based local and remote Web management
● TR069 network management protocol support
● External high-gain antenna
● Higher transmission power for extended coverage
● Any IP based backhaul can be used, including public transmission protected by Internet Protocol Security
● Excellent non-line-of-sight (NLOS) coverage performance
● Peak rate (up to) DL 150 Mbps, UL 50 Mbps @ 20 MHz
● Support 256 concurrent users
● IoT with all standard LTE Evolved Packet Core (EPC)
● Lower power consumption to reduce OPEX
● Support RET function AISG 2.0.
● Excellent non-line-of-sight (NLOS) coverage performance
● Peak rate (up to) DL 150 Mbps, UL 50 Mbps @ 20 MHz
● Support 256 concurrent users
● IoT with all standard LTE Evolved Packet Core (EPC)
● Lower power consumption to reduce OPEX
● Support RET function AISG 2.0.
Hardware Specification |
|
|
LTE Mode |
FDD |
|
Frequency Bands |
Band 1/3/5/8/20/28 Optional |
|
Channel Bandwidth |
5/10/15/20 MHz |
|
Max. Output Power |
46 dBm / channel |
|
Power Supply |
- 48V DC, with AC adaptor (multi- national standards) |
|
Power Consumption |
Typical < 300W; MAX < 360W |
|
Receive Sensitivity |
-102 dBm |
|
Synchronization |
GPS |
|
Interfaces |
One optical (SFP) and one RJ-45 Ethernet interface (1 GE) |
|
MIMO |
DL: 2x2 |
|
Installation |
Pole or wall mount |
|
Antenna Type |
External high gain antenna compatible with eNB mini-DIN connectors |
|
Dimensions (HxWxD) |
430 x 275 x 113 mm |
|
Weight |
12 kg |
|
MTBF |
≥ 150000 hours |
|
MTTR |
≤ 1 hour |
|
Software Specification |
|
|
LTE Standard |
3GPP Release 9 |
|
Peak Rate |
20MHz: |
DL 150Mbps, UL 50Mbps |
10MHz: |
DL 75Mbps, UL 25Mbps |
|
User Capacity |
256 concurrent users |
|
QoS Control |
3GPP standard QCI |
|
Modulation |
DL: QPSK, 16QAM, 64QAM ; UL: QPSK, 16QAM |
|
Voice |
VoLTE, Circuit Switched Fallback (CSFB) to GSM and UTRAN |
|
Traffic Offload |
Local breakout |
|
SON |
Self-Organizing Network: |
|
• Automatic setup |
||
• Automatic Neighbor Relation (ANR) |
||
• PCI confliction detection |
||
RAN Sharing |
Multi-Operator Core Network (MOCN) |
|
RET |
Supported |
|
Network Mgmt |
TR069 |
|
UL Interference Detection |
Supported |
|
Maintenance |
• Remote/local maintenance |
|
• Online status management |
||
• Performance statistics |
||
• Fault management |
||
• Local or remote software upgrade |
||
• Logging |
||
• Connectivity diagnosis |
||
• Automatic start and configuration |
||
• Alarm reporting |
||
• User information tracing |
||
• Signaling Trace |
||
Environmental Specification |
|
|
Operating Temperature |
-40°C to 55°C |
|
Humidity |
5% to 95% |
|
Atmospheric Pressure |
70 kPa to 106 kPa |
|
Ingress Protection Rating |
IP66 |
|
Power Interface Lightning Protection |
Differential mode: ±10 KA ;Common mode: ±20 KA |
● Technical spec subject to change without notice
Hardware Specification |
|
|
LTE Mode |
FDD |
|
Frequency Bands |
Band 1/3/5/8/20/28 Optional |
|
Channel Bandwidth |
5/10/15/20 MHz |
|
Max. Output Power |
46 dBm / channel |
|
Power Supply |
- 48V DC, with AC adaptor (multi- national standards) |
|
Power Consumption |
Typical < 300W; MAX < 360W |
|
Receive Sensitivity |
-102 dBm |
|
Synchronization |
GPS |
|
Interfaces |
One optical (SFP) and one RJ-45 Ethernet interface (1 GE) |
|
MIMO |
DL: 2x2 |
|
Installation |
Pole or wall mount |
|
Antenna Type |
External high gain antenna compatible with eNB mini-DIN connectors |
|
Dimensions (HxWxD) |
430 x 275 x 113 mm |
|
Weight |
12 kg |
|
MTBF |
≥ 150000 hours |
|
MTTR |
≤ 1 hour |
|
Software Specification |
|
|
LTE Standard |
3GPP Release 9 |
|
Peak Rate |
20MHz: |
DL 150Mbps, UL 50Mbps |
10MHz: |
DL 75Mbps, UL 25Mbps |
|
User Capacity |
256 concurrent users |
|
QoS Control |
3GPP standard QCI |
|
Modulation |
DL: QPSK, 16QAM, 64QAM ; UL: QPSK, 16QAM |
|
Voice |
VoLTE, Circuit Switched Fallback (CSFB) to GSM and UTRAN |
|
Traffic Offload |
Local breakout |
|
SON |
Self-Organizing Network: |
|
• Automatic setup |
||
• Automatic Neighbor Relation (ANR) |
||
• PCI confliction detection |
||
RAN Sharing |
Multi-Operator Core Network (MOCN) |
|
RET |
Supported |
|
Network Mgmt |
TR069 |
|
UL Interference Detection |
Supported |
|
Maintenance |
• Remote/local maintenance |
|
• Online status management |
||
• Performance statistics |
||
• Fault management |
||
• Local or remote software upgrade |
||
• Logging |
||
• Connectivity diagnosis |
||
• Automatic start and configuration |
||
• Alarm reporting |
||
• User information tracing |
||
• Signaling Trace |
||
Environmental Specification |
|
|
Operating Temperature |
-40°C to 55°C |
|
Humidity |
5% to 95% |
|
Atmospheric Pressure |
70 kPa to 106 kPa |
|
Ingress Protection Rating |
IP66 |
|
Power Interface Lightning Protection |
Differential mode: ±10 KA ;Common mode: ±20 KA |
● Technical spec subject to change without notice