This Longwave N227 eNode B is an advanced dual carrier (DC) outdoor Long-Term Evolution (LTE) product that operates in Time Division Duplexing (TDD) mode. This eNB provides users with high-speed broadband wireless access to the Internet using 2*20W output power ( 2 x 2 MIMO with 20W output each channel). This eNB is capable of operating in Dual Carrier (DC) or Single Carrier mode. In DC mode, each carrier is treated as an independent cell, supporting 96+96 users, and each supporting 5,10,15,or 20MHz bandwidth. Using a N227 in DC mode simplifies and strea-mlines the deployment of split sectors.
This Longwave N227 eNode B is an advanced dual carrier (DC) outdoor Long-Term Evolution (LTE) product that operates in Time Division Duplexing (TDD) mode. This eNB provides users with high-speed broadband wireless access to the Internet using 2*20W output power ( 2 x 2 MIMO with 20W output each channel). This eNB is capable of operating in Dual Carrier (DC) or Single Carrier mode. In DC mode, each carrier is treated as an independent cell, supporting 96+96 users, and each supporting 5,10,15,or 20MHz bandwidth. Using a N227 in DC mode simplifies and strea-mlines the deployment of split sectors.
● Complies with 3GPP Release 9 standards
● GUI-based local and remote Web management
● Supports 5/10/15/20 MHz bandwidth per carrier and their combinations
● Peak rate (per unit): DL 220 Mbps, UL 28 Mbps @ 2x20 MHz bandwidth
● Any IP based backhaul can be used, including public transmission protected by Internet Protocol Security
● Complies with 3GPP Release 9 standards
● GUI-based local and remote Web management
● Supports 5/10/15/20 MHz bandwidth per carrier and their combinations
● Peak rate (per unit): DL 220 Mbps, UL 28 Mbps @ 2x20 MHz bandwidth
● Any IP based backhaul can be used, including public transmission protected by Internet Protocol Security
● Excellent non-line-of-sight (NLOS) coverage performance
● TR069 network management protocol support
● Support 192 concurrent users per eNodeB
● IoT with all standard LTE Evolved Packet Core (EPC)
● Lower power consumption to reduce OPEX
● Higher transmission power for extended coverage
● Support RET function AISG 2.0.
● Supports Citizens Broadband Radio Service (CBRS)
● Excellent non-line-of-sight (NLOS) coverage performance
● TR069 network management protocol support
● Support 192 concurrent users per eNodeB
● IoT with all standard LTE Evolved Packet Core (EPC)
● Lower power consumption to reduce OPEX
● Higher transmission power for extended coverage
● Support RET function AISG 2.0.
● Supports Citizens Broadband Radio Service (CBRS)
Hardware Specification |
|
||
LTE Mode |
TDD |
||
Frequency Bands |
Band 38/40/41/48 Optional |
||
Channel Bandwidth |
5MHz, 10MHz, 15MHz, 20MHz; 5MHz+5MHz, 10MHz+10MHz, |
||
Max. Output Power |
43 dBm / channel |
||
Power Supply |
- 48V DC, with AC adaptor (multi- national standards) |
||
Power Consumption |
Typical < 200W |
||
Receive Sensitivity |
-102 dBm |
||
Synchronization |
GPS |
||
Interfaces |
One optical (SFP) and one RJ-45 Ethernet interface (1 GE) |
||
MIMO |
DL: 2x2 on each carrier |
||
Installation |
Pole or wall mount |
||
Antenna Type |
External high gain antenna compatible with eNB mini-DIN connectors |
||
Dimensions (HxWxD) |
440 x 240 x 140 mm |
||
Weight |
12 kg |
||
MTBF |
≥ 150000 hours |
||
MTTR |
≤ 1 hour |
||
Software Specification |
|
||
LTE Standard |
3GPP Release 12 |
||
Peak Rate |
2*20MHz |
SA0 |
DL 2x50Mbps, UL 2x42Mbps |
SA1 |
DL 2x80Mbps, UL 2x28Mbps |
||
SA2 |
DL 2x110Mbps, UL 2x14Mbps |
||
2*10MHz |
SA0 |
DL 2x25Mbps, UL 2x21Mbps |
|
SA1 |
DL 2x40Mbps, UL 2x14Mbps |
||
SA2 |
DL 2x55Mbps, UL 2x7Mbps |
||
User Capacity |
96 concurrent users in single carrier mode; 96+96 concurrent users in DC mode |
||
QoS Control |
3GPP standard QCI |
||
Modulation |
DL: QPSK, 16QAM, 64QAM ; UL: QPSK, 16QAM, 64QAM |
||
Voice |
VoLTE, Circuit Switched Fallback (CSFB) |
||
Traffic Offload |
Local breakout |
||
SON |
Self-Organizing Network: |
||
• Automatic setup |
|||
• Automatic Neighbor Relation (ANR) |
|||
• PCI confliction detection |
|||
RAN Sharing |
Multi-Operator Core Network (MOCN) |
||
RET |
Supported |
||
Network Mgmt |
TR069 |
||
Spectrum Scanning |
Supported |
||
UL Interference Detection |
Supported |
||
Maintenance |
• Remote/local maintenance |
||
• Online status management |
|||
• Performance statistics |
|||
• Fault management |
|||
• Local or remote software upgrade |
|||
• Logging |
|||
• Connectivity diagnosis |
|||
• Automatic start and configuration |
|||
• Alarm reporting |
|||
• User information tracing |
|||
• Signaling Trace |
|||
Environmental Specification |
|
||
Operating Temperature |
-40°C to 55°C |
||
Humidity |
5% to 95% |
||
Atmospheric Pressure |
70 kPa to 106 kPa |
||
Ingress Protection Rating |
IP66 |
||
Power Interface Lightning Protection |
Differential mode: ±10 KA ;Common mode: ±20 KA |
● Technical spec subject to change without notice
Hardware Specification |
|
||
LTE Mode |
TDD |
||
Frequency Bands |
Band 38/40/41/48 Optional |
||
Channel Bandwidth |
5MHz, 10MHz, 15MHz, 20MHz; 5MHz+5MHz, 10MHz+10MHz, |
||
Max. Output Power |
43 dBm / channel |
||
Power Supply |
- 48V DC, with AC adaptor (multi- national standards) |
||
Power Consumption |
Typical < 200W |
||
Receive Sensitivity |
-102 dBm |
||
Synchronization |
GPS |
||
Interfaces |
One optical (SFP) and one RJ-45 Ethernet interface (1 GE) |
||
MIMO |
DL: 2x2 on each carrier |
||
Installation |
Pole or wall mount |
||
Antenna Type |
External high gain antenna compatible with eNB mini-DIN connectors |
||
Dimensions (HxWxD) |
440 x 240 x 140 mm |
||
Weight |
12 kg |
||
MTBF |
≥ 150000 hours |
||
MTTR |
≤ 1 hour |
||
Software Specification |
|
||
LTE Standard |
3GPP Release 12 |
||
Peak Rate |
2*20MHz |
SA0 |
DL 2x50Mbps, UL 2x42Mbps |
SA1 |
DL 2x80Mbps, UL 2x28Mbps |
||
SA2 |
DL 2x110Mbps, UL 2x14Mbps |
||
2*10MHz |
SA0 |
DL 2x25Mbps, UL 2x21Mbps |
|
SA1 |
DL 2x40Mbps, UL 2x14Mbps |
||
SA2 |
DL 2x55Mbps, UL 2x7Mbps |
||
User Capacity |
96 concurrent users in single carrier mode; 96+96 concurrent users in DC mode |
||
QoS Control |
3GPP standard QCI |
||
Modulation |
DL: QPSK, 16QAM, 64QAM ; UL: QPSK, 16QAM, 64QAM |
||
Voice |
VoLTE, Circuit Switched Fallback (CSFB) |
||
Traffic Offload |
Local breakout |
||
SON |
Self-Organizing Network: |
||
• Automatic setup |
|||
• Automatic Neighbor Relation (ANR) |
|||
• PCI confliction detection |
|||
RAN Sharing |
Multi-Operator Core Network (MOCN) |
||
RET |
Supported |
||
Network Mgmt |
TR069 |
||
Spectrum Scanning |
Supported |
||
UL Interference Detection |
Supported |
||
Maintenance |
• Remote/local maintenance |
||
• Online status management |
|||
• Performance statistics |
|||
• Fault management |
|||
• Local or remote software upgrade |
|||
• Logging |
|||
• Connectivity diagnosis |
|||
• Automatic start and configuration |
|||
• Alarm reporting |
|||
• User information tracing |
|||
• Signaling Trace |
|||
Environmental Specification |
|
||
Operating Temperature |
-40°C to 55°C |
||
Humidity |
5% to 95% |
||
Atmospheric Pressure |
70 kPa to 106 kPa |
||
Ingress Protection Rating |
IP66 |
||
Power Interface Lightning Protection |
Differential mode: ±10 KA ;Common mode: ±20 KA |
● Technical spec subject to change without notice