N218 4G LTE Indoor FDD Family-Level eNode B

N218-FDD-A

The N218 is an indoor 2 x 50mW picocell eNodeB (eNB), which offers lower cost access for indoor user equipment (UE) and solve indoor blind area problem and enhance the hotspot

capacity. It is specifically used in family, small enterprise, and other indoor scenarios. As with all Longwave products, the N218 supports Long-Term Evolution (LTE) technology, and it operates in Time Division Duplexing (FDD) mode.

With high capacity and easy deployment, the N218 FDD eNode B can help mobile operators to provide better coverage and higher capacity with lower network deployment cost and operating expense (OPEX).

The N218 is an indoor 2 x 50mW picocell eNodeB (eNB), which offers lower cost access for indoor user equipment (UE) and solve indoor blind area problem and enhance the hotspot

capacity. It is specifically used in family, small enterprise, and other indoor scenarios. As with all Longwave products, the N218 supports Long-Term Evolution (LTE) technology, and it operates in Time Division Duplexing (FDD) mode.

With high capacity and easy deployment, the N218 FDD eNode B can help mobile operators to provide better coverage and higher capacity with lower network deployment cost and operating expense (OPEX).

　Features

● GUI-based local and remote Web management

● Supports 5/10/15/20 MHz bandwidth per carrier

● Peak rate (up to): DL 150 Mbps, UL 50 Mbps @ 20 MHz bandwidth

● Any IP based backhaul can be used, including public transmission protected by Internet Protocol Security

● GUI-based local and remote Web management

● Supports 5/10/15/20 MHz bandwidth per carrier

● Peak rate (up to): DL 150 Mbps, UL 50 Mbps @ 20 MHz bandwidth

● Any IP based backhaul can be used, including public transmission protected by Internet Protocol Security

● Compact, all-in-one design of external antenna

● Support 32 concurrent users

● Lower power consumption to reduce OPEX

● IoT with all standard LTE Evolved Packet Core (EPC)

● PoE+ power supply; only one Ethernet cable required for data transmission and power supply

● Compact, all-in-one design of external antenna

● Support 32 concurrent users

● Lower power consumption to reduce OPEX

● IoT with all standard LTE Evolved Packet Core (EPC)

● PoE+ power supply; only one Ethernet cable required for data transmission and power supply

Block Diagram

Specifications

Hardware Specification
LTE Mode		FDD
Frequency Bands		Band 1/3/5/8 Optional
Channel Bandwidth		5/ 10/ 15/ 20 MHz
Max. Output Power		17 dBm / channel
Power Supply		12V DC, AC adaptor (multiple standards optional)
Power Consumption		< 10 W
Receive Sensitivity		-100 dBm
Synchronization		GPS, 1588V2, network listening (NL)
Interfaces		One RJ-45 Ethernet backhaul interface (1 GE) and one RJ-45 local Mgmt. interface (1GE)
MIMO		DL: 2 x 2
Installation		Desktop
Antenna Type		3 dBi external omni antenna
Dimensions (HxWxD)		180 x 140 x 47.5 mm
Weight		0.4 kg
MTBF		≥ 150000 hours
MTTR		≤ 1 hour
Software Specification
LTE Standard		3GPP Release 9
Peak Rate (up to)	20MHz	DL 150 Mbps, UL 50 Mbps
	10MHz	DL 75 Mbps, UL 25 Mbps
User Capacity		32 concurrent users
QoS Control		3GPP standard QCI
Modulation		DL: QPSK, 16QAM, 64QAM UL: QPSK, 16QAM
Voice		VoLTE, Circuit Switched Fallback (CSFB) to GSM and UTRAN
Traffic Offload		Local breakout
SON		Self-Organizing Network:
		• Automatic setup
		• Automatic Neighbor Relation (ANR)
		• PCI confliction detection
RAN Sharing		Multi-Operator Core Network (MOCN)
RET		Supported
Network Mgmt		TR069
UL Interference Detection		Supported
Maintenance		• Remote/local maintenance
		• Online status management
		• Performance statistics
		• Fault management
		• Local or remote software upgrade
		• Logging
		• Connectivity diagnosis
		• Automatic start and configuration
		• Alarm reporting
		• User information tracing
Environmental Specification
Operating Temperature		-5°C to 45°C
Humidity		5% to 95%

● Technical spec subject to change without notice

Hardware Specification
LTE Mode		FDD
Frequency Bands		Band 1/3/5/8 Optional
Channel Bandwidth		5/ 10/ 15/ 20 MHz
Max. Output Power		17 dBm / channel
Power Supply		12V DC, AC adaptor (multiple standards optional)
Power Consumption		< 10 W
Receive Sensitivity		-100 dBm
Synchronization		GPS, 1588V2, network listening (NL)
Interfaces		One RJ-45 Ethernet backhaul interface (1 GE) and one RJ-45 local Mgmt. interface (1GE)
MIMO		DL: 2 x 2
Installation		Desktop
Antenna Type		3 dBi external omni antenna
Dimensions (HxWxD)		180 x 140 x 47.5 mm
Weight		0.4 kg
MTBF		≥ 150000 hours
MTTR		≤ 1 hour
Software Specification
LTE Standard		3GPP Release 9
Peak Rate (up to)	20MHz	DL 150 Mbps, UL 50 Mbps
	10MHz	DL 75 Mbps, UL 25 Mbps
User Capacity		32 concurrent users
QoS Control		3GPP standard QCI
Modulation		DL: QPSK, 16QAM, 64QAM UL: QPSK, 16QAM
Voice		VoLTE, Circuit Switched Fallback (CSFB) to GSM and UTRAN
Traffic Offload		Local breakout
SON		Self-Organizing Network:
		• Automatic setup
		• Automatic Neighbor Relation (ANR)
		• PCI confliction detection
RAN Sharing		Multi-Operator Core Network (MOCN)
RET		Supported
Network Mgmt		TR069
UL Interference Detection		Supported
Maintenance		• Remote/local maintenance
		• Online status management
		• Performance statistics
		• Fault management
		• Local or remote software upgrade
		• Logging
		• Connectivity diagnosis
		• Automatic start and configuration
		• Alarm reporting
		• User information tracing
Environmental Specification
Operating Temperature		-5°C to 45°C
Humidity		5% to 95%

● Technical spec subject to change without notice