The N217 is an indoor 2 x 125mW picocell eNodeB (eNB), which offers lower cost access for indoor user equipment (UE) and solve indoor blind area problem and enhance the hotspot capacity. It is specifically used in family, small enterprise, and other indoor scenarios. As with all Longwave products, the N217 supports Long-Term Evolution (LTE) technology, and it operates in Time Division Duplexing (FDD) mode. With high capacity and easy deployment, the N217 FDD eNode B can help mobile operators to provide better coverage and higher capacity with lower network deployment cost and operating expense (OPEX).
The N217 is an indoor 2 x 125mW picocell eNodeB (eNB), which offers lower cost access for indoor user equipment (UE) and solve indoor blind area problem and enhance the hotspot capacity. It is specifically used in family, small enterprise, and other indoor scenarios. As with all Longwave products, the N217 supports Long-Term Evolution (LTE) technology, and it operates in Time Division Duplexing (FDD) mode. With high capacity and easy deployment, the N217 FDD eNode B can help mobile operators to provide better coverage and higher capacity with lower network deployment cost and operating expense (OPEX).
● GUI-based local and remote Web management
● Supports 5/10/15/20 MHz bandwidth per carrier
● Peak rate (up to): DL 75 Mbps, UL 25 Mbps @ 10 MHz bandwidth
● Any IP based backhaul can be used, including public transmission protected by Internet Protocol Security
● GUI-based local and remote Web management
● Supports 5/10/15/20 MHz bandwidth per carrier
● Peak rate (up to): DL 75 Mbps, UL 25 Mbps @ 10 MHz bandwidth
● Any IP based backhaul can be used, including public transmission protected by Internet Protocol Security
● Compact, all-in-one design of external antenna
● Support 32 concurrent users
● Lower power consumption to reduce OPEX
● IoT with all standard LTE Evolved Packet Core (EPC)
● PoE+ power supply; only one Ethernet cable required for data transmission and power supply
● Compact, all-in-one design of external antenna
● Support 32 concurrent users
● Lower power consumption to reduce OPEX
● IoT with all standard LTE Evolved Packet Core (EPC)
● PoE+ power supply; only one Ethernet cable required for data transmission and power supply
Hardware Specification |
|
|
LTE Mode |
FDD |
|
Frequency Bands |
Band 1/3/5/8 Optional |
|
Channel Bandwidth |
5/ 10 MHz |
|
Max. Output Power |
21 dBm / channel |
|
Power Supply |
12V DC, AC adaptor (multiple standards optional) PoE+ IEEE 802.3at |
|
Power Consumption |
< 12 W |
|
Receive Sensitivity |
-101 dBm |
|
Synchronization |
GPS, 1588V2, network listening (NL) |
|
Interfaces |
One RJ-45 Ethernet backhaul interface (1 GE) and one RJ-45 local Mgmt. interface (1GE) |
|
MIMO |
DL: 2 x 2 |
|
Installation |
Ceiling or wall mount, or desktop |
|
Antenna Type |
4 dBi external omni antenna |
|
Dimensions (HxWxD) |
210 x 210 x 45 mm |
|
Weight |
0.62 kg |
|
MTBF |
≥ 150000 hours |
|
MTTR |
≤ 1 hour |
|
Software Specification |
|
|
LTE Standard |
3GPP Release 9 |
|
Peak Rate (up to) |
10MHz |
DL 75 Mbps, UL 25 Mbps |
User Capacity |
32 concurrent users |
|
QoS Control |
3GPP standard QCI |
|
Modulation |
DL: QPSK, 16QAM, 64QAM UL: QPSK, 16QAM |
|
Voice |
VoLTE, Circuit Switched Fallback (CSFB) to GSM and UTRAN |
|
Traffic Offload |
Local breakout |
|
SON |
Self-Organizing Network: |
|
• Automatic setup |
||
• Automatic Neighbor Relation (ANR) |
||
• PCI confliction detection |
||
RAN Sharing |
Multi-Operator Core Network (MOCN) |
|
RET |
Supported |
|
Network Mgmt |
TR069 |
|
UL Interference Detection |
Supported |
|
Maintenance |
• Remote/local maintenance |
|
• Online status management |
||
• Performance statistics |
||
• Fault management |
||
• Local or remote software upgrade |
||
• Logging |
||
• Connectivity diagnosis |
||
• Automatic start and configuration |
||
• Alarm reporting |
||
• User information tracing |
||
Environmental Specification |
|
|
Operating Temperature |
-5°C to 45°C |
|
Humidity |
5% to 95% |
● Technical spec subject to change without notice
Hardware Specification |
|
|
LTE Mode |
FDD |
|
Frequency Bands |
Band 1/3/5/8 Optional |
|
Channel Bandwidth |
5/ 10 MHz |
|
Max. Output Power |
21 dBm / channel |
|
Power Supply |
12V DC, AC adaptor (multiple standards optional) PoE+ IEEE 802.3at |
|
Power Consumption |
< 12 W |
|
Receive Sensitivity |
-101 dBm |
|
Synchronization |
GPS, 1588V2, network listening (NL) |
|
Interfaces |
One RJ-45 Ethernet backhaul interface (1 GE) and one RJ-45 local Mgmt. interface (1GE) |
|
MIMO |
DL: 2 x 2 |
|
Installation |
Ceiling or wall mount, or desktop |
|
Antenna Type |
4 dBi external omni antenna |
|
Dimensions (HxWxD) |
210 x 210 x 45 mm |
|
Weight |
0.62 kg |
|
MTBF |
≥ 150000 hours |
|
MTTR |
≤ 1 hour |
|
Software Specification |
|
|
LTE Standard |
3GPP Release 9 |
|
Peak Rate (up to) |
10MHz |
DL 75 Mbps, UL 25 Mbps |
User Capacity |
32 concurrent users |
|
QoS Control |
3GPP standard QCI |
|
Modulation |
DL: QPSK, 16QAM, 64QAM UL: QPSK, 16QAM |
|
Voice |
VoLTE, Circuit Switched Fallback (CSFB) to GSM and UTRAN |
|
Traffic Offload |
Local breakout |
|
SON |
Self-Organizing Network: |
|
• Automatic setup |
||
• Automatic Neighbor Relation (ANR) |
||
• PCI confliction detection |
||
RAN Sharing |
Multi-Operator Core Network (MOCN) |
|
RET |
Supported |
|
Network Mgmt |
TR069 |
|
UL Interference Detection |
Supported |
|
Maintenance |
• Remote/local maintenance |
|
• Online status management |
||
• Performance statistics |
||
• Fault management |
||
• Local or remote software upgrade |
||
• Logging |
||
• Connectivity diagnosis |
||
• Automatic start and configuration |
||
• Alarm reporting |
||
• User information tracing |
||
Environmental Specification |
|
|
Operating Temperature |
-5°C to 45°C |
|
Humidity |
5% to 95% |
● Technical spec subject to change without notice